Start/Stop Parameters

Description

Lettering and compounds can be specify their start/stop locations. Examples include center of the design, first/last stitches, etc.

Parameters

• StartLocation - Location of the start stitch of the design.
• StopLocation - Location of the stop stitch of the design.
• Valid values are:
  • sslFirstStitch - First stitch of the design.
  • sslLastStitch - Last stitch of the design.
  • Please refer to the image below for the following Start/Stop Locations
  • sslTopLeft
  • sslTopCentre
  • sslTopRight
  • sslMiddleLeft
  • sslCentre
  • sslMiddleRight
  • sslBottomLeft
  • sslBottomCentre
  • sslBottomRight
  • sslUserDefined
  • The following parameters are applicable when the Start/Stop are sslUserDefined
  • UserDefinedStartPointX - Valid when StartLocation is set to sslUserDefined.
  • UserDefinedStartPointY - Valid when StartLocation is set to sslUserDefined.
  • UserDefinedStopPointX - Valid when StopLocation is set to sslUserDefined.
  • UserDefinedStopPointY - Valid when StopLocation is set to sslUserDefined.
  • StartOffsetX - X Offset of the start stitch.
  • StartOffsetY - Y Offset of the start stitch.
  • StopOffsetX - X Offset of the stop stitch.
  • StopOffsetY - Y Offset of the stop stitch.
  Default is sslCentre.
• StartStopAlignment - Alignment of the start stitch and the stop stitch. Valid values are:
  • ssatNone
  • ssatAlignStartWithEnd
  • ssatAlignEndWithStart
  Default is ssatNone.

Example

Lettering?Text=Pulse&StartLocation=sslFirstStitch&StopLocation=sslLastStitch

---